Journal of Advanced Materials in Engineering (Esteghlal)

Author Index

A

A. A. Golafshani, Seismic Vulnerability of Special Structures: A Case Study of Toos Power Plant Stack [Volume 25, Issue 2, 2007, Pages 73-91]
A. Bakhshi, Seismic Vulnerability of Special Structures: A Case Study of Toos Power Plant Stack [Volume 25, Issue 2, 2007, Pages 73-91]
A. F. Nateghi, Development of Fragility and Reliability Curves and Seismic Vulnerability Evaluation of Talehzang Concrete Bridge [Volume 25, Issue 1, 2006, Pages 79-99]
A. Najafi Zadeh, Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]
A. R. Safari, Theoretical and Experimental Collapse Analysis of Ring Stiffened Shells Using Finite Element Software Packages and Application of Results to a Submarine Pressure Hull [Volume 25, Issue 1, 2006, Pages 227-236]
A. Saidi, Study of Anatase-to-Rutile Phase Transformation in Milled and Unmilled Samples [Volume 25, Issue 1, 2006, Pages 207-216]
A. Shafyei and N. J. Welham, Study of Anatase-to-Rutile Phase Transformation in Milled and Unmilled Samples [Volume 25, Issue 1, 2006, Pages 207-216]
A. Vasseghi, Development of Fragility and Reliability Curves and Seismic Vulnerability Evaluation of Talehzang Concrete Bridge [Volume 25, Issue 1, 2006, Pages 79-99]
A. Zaery, Increase of Sliding Mode Controller Stability Limit [Volume 25, Issue 2, 2007, Pages 205-212]

B

B. Daei, Gradient-based Ant Colony Optimization for Continuous Spaces [Volume 25, Issue 1, 2006, Pages 33-45]

D

D. Mostofinejad and M. Hoseinian, An Investigation of Coarse Aggregate, Water-Cement Ratio, and Silika Fume on Frost Resistance of HS Concrete [Volume 25, Issue 2, 2007, Pages 31-49]

E

Ebrahim Hajidavalloo, Evaluation of Evaporative Cooling for Heat Transfer in the Condenser of Window-Air Conditioners [Volume 25, Issue 1, 2006, Pages 135-147]
E. Shasavandi, A Rapid Optimization Method for Slip Surface in Earth Slopes Using Genetic Algorithm [Volume 25, Issue 2, 2007, Pages 93-112]
E. Shirani, Mixed Large-Eddy Simulation Model for Turbulent Flows across Tube Bundles Using Parallel Coupled Multiblock NS Solver [Volume 25, Issue 2, 2007, Pages 131-149]

F

F. Farhat-Nia and M. Salimi, Analysis of Rolling Process for Clad Sheet Using the Modified Slab Method [Volume 25, Issue 1, 2006, Pages 121-134]
F. Nateghi, Analytical Assessment of the Behaviour of the Masonry Wall Strengthed by Steel Mesh and Shotcrete [Volume 25, Issue 2, 2007, Pages 213-221]
F. Nateghi-Elahi, Study of Energy Dissipation in Accordion Thin-Walled Tubes under Axial Cyclic Loads [Volume 25, Issue 1, 2006, Pages 101-119]

G

GH. Moslehi and H. Ghahar, A Heuristic Algorithm for Project Scheduling Problem to Maximizing the Net Present Value [Volume 25, Issue 2, 2007, Pages 11-30]
G. Mirjalily, Optimum Local Decision Rules in a Distributed Detection System with Dependent Observations [Volume 25, Issue 2, 2007, Pages 1-10]

H

Hassan Haddadpour, Stress Analysis of Flight Vehicles under Flight Conditions [Volume 25, Issue 1, 2006, Pages 217-226]
H. Hossieni, Optimum Local Decision Rules in a Distributed Detection System with Dependent Observations [Volume 25, Issue 2, 2007, Pages 1-10]
H. Moeshginkelk, Neural-Network-Aided On-line Diagnosis of Broken Bars inInduction Motors [Volume 25, Issue 1, 2006, Pages 47-61]

M

M. Danesh, Neural-Network-Aided On-line Diagnosis of Broken Bars inInduction Motors [Volume 25, Issue 1, 2006, Pages 47-61]
M. Darbandi, Developing a Shock-Capturing Formulation with Higher Performance to Capture Normal Standing Shock in All-Speed Regime [Volume 25, Issue 2, 2007, Pages 167-181]
M. Ebrahimi, Neural-Network-Aided On-line Diagnosis of Broken Bars inInduction Motors [Volume 25, Issue 1, 2006, Pages 47-61]
M. Eftekhari, Gradient-based Ant Colony Optimization for Continuous Spaces [Volume 25, Issue 1, 2006, Pages 33-45]
M. E. Hamedani Golshan, Application of Tabu Search to Optimal Placement of Distributed Generation and Reactive Power Sources [Volume 25, Issue 1, 2006, Pages 17-31]
M. Ghayour, Theoretical and Experimental Collapse Analysis of Ring Stiffened Shells Using Finite Element Software Packages and Application of Results to a Submarine Pressure Hull [Volume 25, Issue 1, 2006, Pages 227-236]
M. H. Bagheripour, A Rapid Optimization Method for Slip Surface in Earth Slopes Using Genetic Algorithm [Volume 25, Issue 2, 2007, Pages 93-112]
M. H. Enayati and M. Salehi, An Investigation of the Use of Ni3Al Intermetallic Compound for Fabrication of Al Matrix Composites [Volume 25, Issue 2, 2007, Pages 183-190]
M. Jafarboland, Robust Tracking Control of Satellite Attitude Using New EKF for Large Rotational Maneuvers [Volume 25, Issue 1, 2006, Pages 1-15]
M. Khan-Mohammadi and M. S. Marefat, Experimental Evaluation of Performance Criteria for Reinforced Concrete Beams under Cyclic Loading [Volume 25, Issue 1, 2006, Pages 63-77]
M. Mashayekhi, Ductile Damage Evolution under Triaxial Stress Conditions: Computational and Experimental Evaluations [Volume 25, Issue 2, 2007, Pages 151-165]
M. Moradiyan, Neural-Network-Aided On-line Diagnosis of Broken Bars inInduction Motors [Volume 25, Issue 1, 2006, Pages 47-61]
M. Motamedi, Study of Energy Dissipation in Accordion Thin-Walled Tubes under Axial Cyclic Loads [Volume 25, Issue 1, 2006, Pages 101-119]
M. R. Rahimi pour and M. Moayeri, Investigation of Defects in Ferro-Tic Composites and their Prevention [Volume 25, Issue 1, 2006, Pages 167-178]
M. R. Tabeshpour, Seismic Vulnerability of Special Structures: A Case Study of Toos Power Plant Stack [Volume 25, Issue 2, 2007, Pages 73-91]
M. R. Toroghinejad, Investigation of Parameters Involved in the Production of Aluminum Matrix Composites Using Hot Powder Extrusion [Volume 25, Issue 1, 2006, Pages 179-188]
M. Sayadi and M. M. Moshksar, Investigation of Parameters Involved in the Production of Aluminum Matrix Composites Using Hot Powder Extrusion [Volume 25, Issue 1, 2006, Pages 179-188]
M. Shamanian, Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]
M. Sheikhi and H. Haji-Kazemi, A Theoretical Study of the Behavior of Reinforced Concrete Columns Strengthened by Steel Plates and Transverse Reinforcements [Volume 25, Issue 2, 2007, Pages 65-72]
M. Talebi, Mixed Large-Eddy Simulation Model for Turbulent Flows across Tube Bundles Using Parallel Coupled Multiblock NS Solver [Volume 25, Issue 2, 2007, Pages 131-149]
M. Ziaeefar, Study of Energy Dissipation in Accordion Thin-Walled Tubes under Axial Cyclic Loads [Volume 25, Issue 1, 2006, Pages 101-119]

N

N. Sadati, Robust Tracking Control of Satellite Attitude Using New EKF for Large Rotational Maneuvers [Volume 25, Issue 1, 2006, Pages 1-15]
N. Setoudeh, Study of Anatase-to-Rutile Phase Transformation in Milled and Unmilled Samples [Volume 25, Issue 1, 2006, Pages 207-216]

R

R. Bagheri and M.A. Golozar, Mechanical Properties of Polypropylene Coating Containing Maleic Anhydride on Plain Carbon Steel [Volume 25, Issue 2, 2007, Pages 191-203]
R. Shateri, Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]
R. Taherian, Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]

S

S. A. Arefifar, Application of Tabu Search to Optimal Placement of Distributed Generation and Reactive Power Sources [Volume 25, Issue 1, 2006, Pages 17-31]
S. M. Miresmaeili and S. Shabestari, Study of the Mechanism and Causes of Pore Formation in Sr-modified Al-Si Alloys [Volume 25, Issue 1, 2006, Pages 189-206]
S. Mortazavi, A Numerical Study of Drop Motion in Poiseuille Flow [Volume 25, Issue 2, 2007, Pages 113-129]
S. M. Zahrai and B. Rad, Analytical Investigation of TADAS Damper Applied in Seismic Rehabilitation & Design of Concrete Structures [Volume 25, Issue 2, 2007, Pages 51-64]
S. Ziaei-Rad, Ductile Damage Evolution under Triaxial Stress Conditions: Computational and Experimental Evaluations [Volume 25, Issue 2, 2007, Pages 151-165]

V

V. Mokarizadeh, Developing a Shock-Capturing Formulation with Higher Performance to Capture Normal Standing Shock in All-Speed Regime [Volume 25, Issue 2, 2007, Pages 167-181]